Melnor Aqua Timer 3060 Mode D'emploi page 14

Selecting User-Set Schedules
1. Press the SETUP key one time.
2. Press the RIGHT CURSOR
press ACCEPT
3. The numerals corresponding to the programs you have entered will appear.
Using the LEFT
wish to use and then press ACCEPT
The timer will switch to AUTO mode and begin running the USER SET program
you selected.
REVIEWING SCHEDULES
1. Press the REVIEW key one time.
2. Use the LEFT
program you wish to review, either PRE-SET or USER SET, then press the
ACCEPT key.
3. Use the LEFT
you wish to review, then press ACCEPT
4. By continuing to press the ACCEPT
various settings within the program.
5. When you reach the end of the program, the timer will return to step 3. You
can use the cursor keys to select another program to review or press the UP
CURSOR key to return to AUTO mode.
Note: You cannot make changes during a review. To make changes, you must
create a new program in SETUP mode. You may then save the new program
replacing a previous one.
key twice to move to USER SET and then
.
and RIGHT CURSOR
and RIGHT CURSOR
and RIGHT CURSOR
keys, choose the program you
to activate it.
keys to choose which type of
keys to choose which program
.
key you will be able to review the
11