Melnor Aqua Timer 3060 Mode D'emploi page 12

3. The unit will proceed to USER SET (schedules). The numeral 1 will be blink-
ing. To save this program as program 1, simply press ACCEPT
Otherwise, use the RIGHT CURSOR
wish to use as a reference for this program, and press ACCEPT
must save the program. Otherwise, the program will run only once.
To water on odd or even days
1. After programming the Mist Cycle, the unit will begin flashing a small arrow
beside WATER DAYS. Press the ACCEPT
arrow will move to the odd-even area.
2. Use the RIGHT CURSOR
then press the ACCEPT
3. The unit will proceed to USER SET (schedules). The numeral 1 will be blink-
ing. To save this program as program 1, simply press ACCEPT
Otherwise, use the RIGHT CURSOR
to use as a reference for this program, and press ACCEPT
save the program. Otherwise, the program will run only once.
MIST CYCLE
The Mist Cycle is an advanced feature that repeatedly starts and stops watering
during the watering cycle. This allows more water to soak in and less to run
off. This can greatly increase the efficiency of your watering.
key to move to the numeral you
key to select the odd dates or even dates and
key.
key to move to the numeral you wish
9
key twice and the small
. You must
.
. You
.