Melnor Aqua Timer 3060 Mode D'emploi page 9

CREATING YOUR OWN WATERING SCHEDULE
In addition to the five pre-set schedules already in the unit, up to five user-set
schedules can be created and stored in the unit. Programming a custom water-
ing schedule is easy. Simply follow these steps.
Enter Create Schedule Mode
1. Press the SETUP key
2. Press the ACCEPT
Select the number of cycles you wish to water. One cycle will water once a
day, two cycles will water twice and so on.
3. Using the LEFT
ber of watering cycles and press the ACCEPT
automatically progress to the next step.
4. Enter the start time for the first watering cycle. Using the LEFT
RIGHT CURSOR
select the minutes and press ACCEPT
5. In the same way, enter the stop time.
The timer will now flash an indicator beside Mist Cycle. For a full explanation
of the mist cycle and its benefits, turn to page 9.
6. The word "NO" will be flashing indicating no mist cycle. To proceed without
a mist cycle, simply press ACCEPT
the LEFT and RIGHT CURSOR
then press ACCEPT
one time. The word "CREATE" will begin flashing.
key one time to beginning programming.
and RIGHT CURSOR
keys, first select the hour and press ACCEPT
.
keys, choose the desired num-
key once. The unit will
.
. If you wish to use a mist cycle, use
keys to choose the desired cycle and
6 6
and
. Then