Publicité
Les langues disponibles
Les langues disponibles
Install the hanging part of the ceiling fan
1. Install downrod assembly
Phillips
screwdriver
Phillips
screwdriver
1.Remove the pre installed screws
and install the .motor protective
cover at the specified position
1.Thread the suspender through the
suspended clock and coupling
cover.
2.Then insert the tail of the
suspender from the lifting head of
the motor.
3.After the lateral pin is threaded
out from the suspended head
position,insert R type pin.
4.Tighten the lifting head screws.
5.Hang the fan of the hanging pipe
into the hanger.
10
Assembly - Hanging the Fan(continued)
1.Making the electrical connections
WARNING: Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the fan.If
you have larger than 12-gauge house wiring or more than one house
wire to connect to the fan wiring,consult an electrician for the proper
size wire nuts to use.
IMPORTANT: Use the plastic wire connectors supplied with your fan.
Secure the connectors with electrical tape and ensure there are no
loose strands or connections.
WARNING:Remove the rubber motor stops on the bottom of fan
before installing the blades or testing the motor.
From controller
From CEILING FAN
BLUE
FOR MOTOR(LIGHT)
WHITE
FOR MOTOR(LIGHT)
Red
FOR MOTOR(FAN)
Gray
FOR MOTOR(FAN)
Brown
FOR MOTOR(FAN)
green
1.Raise the fan and place the hanger ball onto mounting bracket.
2.Rotate the fan until the notch on hanger ball snaps into the slot
on mounting bracket and sits firmly.
NOTE: THE DOWNROD AND HANGER BALL SHOULD NOT ROTATE
IF THIS STEP IS DONE CORRECTLY.
3.Loose the safety wire clamp.
4.Route the safety wire through the side fan hole
on mounting bracket,and retighten the safety wire
with safety wire clamp.
5.Connect the wire connector plugs correctly.
The wire connector plugs design is designed with
misplug-proof device, please don' t force to plug.
Otherwise it may affect the normal use of the light
fan or burn the fan motor.
FOR AC IN L
Black
White
FOR AC IN N
green
BLUE
WHITE
Red
Gray
Brown
11
EN
Ground wire
Publicité
