Publicité
Les langues disponibles
Les langues disponibles
Assembly- Attaching the Fan Blades
1.Fastening the blade arms to the motor
NOTE: Your fan features revolutionary advancements for quick and
easy blade installation.lncluding an alignment post and captive blade
arm screws.
WARNING: Remove the rubber motor stops on the bottom of the
fan before installing the blades or testing the motor.
2
1
1.Remove the pre installed screws.
2.Install the fan blade on the corresponding screw hole, and then install
and fix it with the removed screws.
Phillips
screwdriver
06
Assembly - Attaching the Lights
1
2
1.Remove the pre installed screws.
2.Install the fan blade on the corresponding screw
hole, and then install and fix it with the removed screws.
Phillips
screwdriver
07
EN
Publicité
