Sharp SD-AT100W Mode D'emploi page 59

! Digitally connecting MD recorder or sur-
round processor, etc.
By connecting this unit to processors or amplifiers that support Dolby Digital/DTS sur-
round, you can enjoy the sound via external equipment. An MD recorder can also be
connected to this unit. (Refer to the operation manual of the equipment to be con-
nected.)
MD recorder
Dolby Digital/DTS
processor or amplifier
To optical digital audio
Optical digital socket cap
When using the optical digital socket, remove the cap
first. After using the socket, replace the cap.
Caution:
To optical digital audio
Turn off the other equipment before making this connection.
output socket
Notes:
" Do not change the sound mode whilst recording. The sound may skip.
" Do not plug in or unplug the headphones whilst recording. The sound may skip.
" To record the Dolby Digital of a DVD, set the audio output to "D-PCM" (see page
" If the PCM sound is recorded on the DVD, set the audio output to PCM (see page
" DTS sound on a DVD cannot be recorded.
To optical digital
audio input socket
Optical digital cable
(option: AD-M1DC)
input socket
Optical digital cable
(option: AD-M3DC)
23).
40).
02/2/27 SD-AT100W(X)E6.fm
SD-AT00W
ENGLISH
4
E-58