Publicité
Les langues disponibles
Les langues disponibles
PUSH-BUTTONS AND ADJUSTMENTS
A) Screen with manually angle-adjustable 4"
or 3,5" LCD monitor.
B) Microphone
C) Loudspeaker
D1 – D2)
Pair
of
for:Choice of the ring tone / lighting adju-
stment.
• With monitor off.
Press the D1 or D2 push-button for at
least 5 seconds to choose the ring tone for
the entrance panel call. Since the first ring
tone starts ringing you can scroll all the ring
tones by repeatedly pressing the D1 or D2
push-button.
• With monitor off.
To choose the ring tone for the outdoor call,
press for at least 5 seconds the D1 and D2
push-buttons simultaneously until the red
led "M" lights up with intermittent light.
Press then the D1 or D2 push-button to
choose the ring tone.
• With monitor lit.
You can adjust the lighting by pressing the
D1 or D2 push-button.
E1 – E2)
Pair of push-buttons "
For chime volume / contrast adjustment /
audio volume adjustment.
• With monitor off.
To adjust the chime volume press the E1 or
E2 push-button for at least 5 seconds until
the first chime starts ringing. Increase or
decrease the volume by pressing the E1 or
E2 push-button. The chime exclusion may
be obtained by pressing the E2 push-button
repeatedly until the "M" red Led lights up.
• With monitor on.
By pressing the E1 or E2 push-button you
can adjust the contrast.
• With monitor on.
During a conversation between monitor and
entrance panel adjust the audio volume by
pressing the E1 or E2 push-button simulta-
neously with the push-button "
push-buttons
"
":
".
GB
F) Push-button "
G) Push-button "
chboard (if installed) or lock release
when the monitor is called.
"
H) Push-button "
F4, F5 (if connected to the installation,
and in function of its programming).
I) Push-button "
the call and/or switch-on of the monitor,
hold the push-button down for conver-
sation with the speech unit.
L) "
" Open door sign.
The switching on of the sign (green
LED) indicate that the door is open (the
function is optional in relation to the
type of installation).
M) "
" Sign for the "chime exclusion
NOTES FOR USER:
- Do not open or tamper with the set.
- In case of failure, modification or mainte-
nance of the units (power supply, etc.)
contact only specialized technicians.
- Maximum operating temperature: 40°
- Do not expose the appliance to dripping,
sprinklings of water and do not put any
object filled with water on it. Do not
obstruct the ventilation openings.
- Warning: to avoid hurting oneself, this
appliance must be fixed to the wall
according to the installation instructions.
": function F1
": Call to the swit-
": Function F2, F3,
": "Talk/Listen". After
Publicité
