Hameg Instruments HZO50 Manuel page 16

Safety Standards
EN 600-:00
EN 600--0:00
EN 600-0:00
00 V Cat III, Pollution Degree 
EMC Standards
EN 66--:006
ROHS and WEEE compliant
This product is designed to be safe under the following con-
ditions:
– indoor use
– altitude up to 000 m
– temperature 0°C to +50°C
– maximum relative humidity 80% for temperatures up
to  °C decreasing linearly to 40% relative humidity at
50 °C.
Use of the probe on uninsulated conductors is limited to
00 V ACRMS or d.c. and frequencies below  kHz.
Safety in its use is the responsibility of the operator who
must be a suitably qualified or authorised person. Ensure
that your fingers are behind the protective barrier see FIG 
when using the probe.
Always inspect the probe and lead for damage
before use.
To avoid electric shock, keep the probe clean and
free of surface contamination.
STOP
STOP
TiPP
TiPP
6
Subject to change without notice