GYS FLIP Mode D'emploi page 5

Translation of the original instructions
EN
FLIP FLAP
SAFETY INSTRUCTIONS
This user's manual includes information on the operation of
the equipment and the precautions to be followed for the
user's safety. Please read it carefully before first use and
keep it in a safe place for future reference. These instructions
must be read and understood before any operation. Any
modification or maintenance not indicated in the manual
must not be undertaken. Any damage to persons or property
caused by use not in accordance with the instructions in this
manual shall not be borne by the manufacturer. In the event
of a problem or uncertainty, consult a qualified person to
handle the product correctly.
Use the welding helmet only for eye and face protection
against harmful ultra violet and infrared radiation, sparks
and spatter from welding.
Never look directly at welding arcs without eye protection
when the arc is initiated. Failure to do so may cause painful
inflammation of the cornea and potentially irreversible
damage to the lens which may result in cataracts.
Look out! Danger of injury if a person wearing a mask and
goggles is hit by particles thrown at high speed.
The mask and shields do not guarantee unlimited protection
against major shocks or impacts, explosive mechanisms or
corrosive liquids. Avoid welding or cutting in these severe
environments.
Do not weld or cut above his head with this mask.
Move his face away from the smoky area. Use forced
ventilation or local exhaust to remove smoke.
Oxyacetylene, laser or gas welding and cutting is not
permitted with this mask.
Before each use :
- Carefully inspect the mask.
- Replace worn or damaged parts immediately.
- Replace face shields if they are cracked or scratched to
prevent damage to the user's eyes.
The headband can potentially cause allergies in sensitive
individuals.
The welding mask must be moved carefully to avoid damage
the guards and/or protective shell.
5