Eneo NXD-2012PTZ1080 B Mode D'emploi page 24

2. Fix the Mounting Bracket to the ceiling using supplied Anchors (4x) and Mounting
Screws (4x) (Figure B).
3. Hook up the Safety Lanyard to the Safety Lanyard Hook of the Mounting Bracket
(Figure C).
4. Align the locking tab on the bracket and the locking slot on the base of the dome
(Figure D).
5. Turn the dome to the counterclockwise about 10 degree to the locked position
(Figure E).
Safety Lanyard Hook
Locking Screw
24
Template Sheet
Mounting Bracket
Safety Lanyard
Locking Tab
Locking Slot
Locking Tab
Locking Slot