IKEA TVATTAD Mode D'emploi page 11

ENGLISH
FlexTime
8
With this option reduces the programme
duration depending on the load size and the
degree of soiling.
When you set a washing programme, the
display shows the default duration and the
dashes .
Tap on this button to reduce the programme
duration according to the level of garments
soil. The display shows the new programme
duration and a number of dashes will
decrease accordingly. The shortest is the
cycle the smallest should be the load.
When setting a steam
programme, this button allows to
chose three steam levels and the
programme duration is reduced
accordingly.
Permanent Child Lock option
Hold pressed the button
set the Child Lock option
prevents children from playing with the
control panel: all controls are disabled. To
deactivate this option, hold this button
pressed for 3 seconds.
Prewash
9
This option adds a prewash phase to a
washing program. Ideal to remove
particulate soil like mud and clay.
Spin and additional options
10
When you set a programme, the appliance
automatically sets the default spin speed
allowed. Touch repeatedly this button to:
• Change the spin speed. The display
shows only the spin speeds available for
the set programme.
• Set the No Spinspin options
Set this option to deactivate all spin
phases. The appliance performs the only
draining phase of the selected washing
for 3 seconds to
. This option
.
To download the full version visit www.ikea.com
programme. Set this option for very
delicate fabrics. The rinses phase uses
more water for some washing
programmes
• Activate the Rinse Hold
The final spin is not performed. The water
of the last rinse is not drained out to
prevent the fabrics from creasing. The
washing programme ends with water in
the drum.
The indicator
stays locked and the drum turns regularly
to reduce creasing. You must drain the
water to unlock the door.
If you touch the button
performs the spinning phase and drains
the water.
The appliance empties the
water out automatically after
18 hours approximately.
Temperature
11
When you select a washing programme, the
appliance automatically proposes a default
temperature. With this option you can
change the temperature.
The indicator = cold water.
12
Thanks to this button, a cycle can perform:
• Only washing:
mode).
• Washing and drying:
indicators are on.
• Only drying:
Acoustic signals
This appliance has different acoustic signals.
To activate/deactivate some of the acoustic
signals when the programme is completed,
touch the and the
simultaneously for about 2 seconds. The
display shows On or Off.
option.
is on display. The door
, the appliance
indicator is on (default
and
indicator is on.
buttons
11