Mode: FM Radio (optional)
Switch to "fm
Note: Always connect your earphones to the
an antenna for the internal radio.
EN
Briefly press the button to open a menu. You can now start the automatic station search, save
stations and delete them. To leave FM radio mode, hold the button for about 1 second, and the
main menu will appear.
• Automatic memory assignment / automatic station search
To start the automatic station search, switch in the menu to "A
pressing the button. The i.Beat cebrax
the radio stations with the strongest reception and saves them in 20 memory locations.
• Switching between manual station selection and memory mode
Briefly press the button to switch between manual station selection "m
mode "s
tAtion
• Switching between saved stations
In "s
tAtion
left or to the right .
• Manually change frequency / manual search
In "m
AnuAl
reception frequency by 0.1 MHz. Hold down the joystick to the left or right
for the i.Beat cebrax
for stations with the strongest reception.
• Saving individual stations
Change to manual station selection "m
" from the menu. Select a memory by moving the joystick to the left or right
stAtion
and press the button to save the station.
• Deleting saved stations
Select "d
elete stAtion
left or right and confirm the deletion by pressing the button.
• Recording FM radio
Briefly press the button to start recording the radio. Briefly press the button again to
stop recording.
Note: All radio recordings are saved in the "FM" folder of the i.Beat cebrax
" mode.
rAdio
".
" mode, you can switch between available presets by briefly pressing the joystick to the
" mode, briefly push the joystick to the left or right to change the
FM
" from the menu. Then select a saved station by moving the joystick to the
i.Beat cebrax
FM
to automatically scan the upper and lower frequencies
". Choose the desired frequency, and select "s
AnuAl
– 10 –
FM
since the earphone cable serves as
", and confirm by
uto scAn
now automatically searches for
AnuAl
" and memory
Ave
FM
.