Use Of The Telescopic Seatpost; Use Of Pedal Side Gears - P; Breaking In The Brakes - LMX Bikes ELECTRIC FREERIDE LMX 64 Manuel Utilisateur

Refer to the screen manual for more information :
https://drive.google.com/file/d/1SDHpZIEoWHNkPJslkWmB6fsO9MrqKuiA/view?usp
=sharing
6.

USE OF THE TELESCOPIC SEATPOST

To unlock the seatpost : use the lever at the left of the
handlebar.
To lower the seatpost : use your weight on the seatpost
while pressing the lever.
7. USE OF PEDAL SIDE GEARS
The LMX 64 is delivered with an 11 or 12 speed transmission. Use
the handlebar controls to adapt the gear to the terrain. As a
general rule to limit the power consumption, it is better to turn
faster in the climbs than to press very hard on the pedals.
Note that the motor assistance is proportional to the pedaling
power.
8.

BREAKING IN THE BRAKES

It is important during the first few uses to run in the brakes in order to ensure
efficient braking without noise.
Running-in forms the wear layer of the brake disc. To avoid icing of the surface,
which can cause noise during braking, it is important to follow the running-in
recommendations.
- When using it for the first time, avoid any continuous braking at low power,
for example when going downhill.
- Favor short braking brusts, which will deposit a layer of pad dust on the
disc and prepare the braking surface for optimal performance and without
noise.
10