LMX Bikes ELECTRIC FREERIDE LMX 64 Manuel Utilisateur page 51

B. Replacing the brake pads
Unscrew the two screws circled in red in the photo.
Then remove the caliper from its housing.
Remove the pin which prevents the rod from coming
out of its housing.
Firmly hold the stirrup in the palm of your hand and
unscrew the stem retaining the pads.
Push the pads down onto the caliper.
We get the following three pieces to change.
CAUTION : Never activate the brake lever when the caliper and disc are not
installed. You risk removing the pistons from the caliper.
20