Fuse Replacement; Errors And Faults In Use; Battery Protection - LMX Bikes ELECTRIC FREERIDE LMX 64 Manuel Utilisateur

Install the new pads and replace the pin and the
circlip.
Install the caliper on the LMX and tighten the two
screws M6 so as to have a rotation of the rear wheel
without friction.
Tighten the two screws to 10 Nm.

10. FUSE REPLACEMENT

LMX 64H vehicles are fitted with fuses.
➔ 1 fuse located under the battery.
It protects and isolates the 12V circuit in the event of a problem or short
circuit on it.
Reference : 5x20 mm, type F, 500 mA.
LMX 64T vehicles are not fitted with user replaceable fuses.

ERRORS AND FAULTS IN USE

If the power supply is abnormally cut during use, refer to the following elements :
1.

BATTERY PROTECTION

The system has several security functions. In general, the battery is automatically
reset.
If not, be sure to remove it from the LMX and then reinstall it.
21