Safety Instructions - LMX Bikes ELECTRIC FREERIDE LMX 64 Manuel Utilisateur

The braking performance will significantly increase once a correct break-in is
carried out. Particular attention is required during this step, especially at the front
brake.

SAFETY INSTRUCTIONS

Before driving, the owner must read and follow safety instructions :
The LMX 64H is a 50cc moped street legal vehicle. It must therefore be used on
roads authorized by the regulations in force in your country (L1e-B approval).
The LMX 64T is not homologated and is designed for private use only. It must not
be used on public roads.
Offdriving-road can be dangerous, control your speed at all times and always be
prepared for the unexpected.
Wearing protective equipment is mandatory: Helmet and gloves with motorcycle
approval a minimum.
Shin pads and body armor are highly recommended.
Before driving, be informed of your area of evolution and stay away from the
restricted areas.
Although it is electric, the LMX 64 is still a motor vehicle and should not be used in
areas prohibited to motor vehicles.
Electrical systems such as batteries, motors, and controllers can get hot, so avoid
touching them after a ride.
Batteries and systems can catch fire in the event of an impact or improper use. In
this case, stay away from fire.
Do not breathe vapors and use fire extinguishers. Powder fire extinguishers (CO2)
are recommended for battery and electric fires.
If your frame is damaged in an accident or other problem, do not use the LMX. A
damaged part can cause a dangerous failure at an unexpected time.
Please contact us if your frame is damaged, so that your frame can be replaced
and you can ride safely.
Always test your LMX on a smooth surface with suitables protective equipment. Do
not let inexperienced riders test your LMX if it is in high power modes (4 and 5
modes).
11