Removing The Rear Wheel - LMX Bikes ELECTRIC FREERIDE LMX 64 Manuel Utilisateur

A first cleaning phase can be carried out using a penetrating product type WD40.
Care should be taken not to put it on the discs as there is a risk of contamination of
the pads.
Once this is done, the chain should be wiped with a cloth. The places to grease
regularly on your vehicle are as follows: chain tensioner, derailleur rollers, the 2
chains. Warning : a belt transmission does not lubricate!
The frequency of lubrication therefore depends on the type of terrain on which you
are riding and the conditions of use.
5.

REMOVING THE REAR WHEEL

To change an inner tube or a tire, you may have to remove the rear wheel. In this
case follow the following steps :
1.
Put the derailleur in the maintenance position, using the locking button.
2. Install the pedal chain on the side of the axle then slacken the engine
chain.
3. Install the engine chain over the swingarm.
15