Recommended Tightening Torques - LMX Bikes ELECTRIC FREERIDE LMX 64 Manuel Utilisateur

Maintenance consists mainly of cleaning and greasing after each ride and keeping
the nuts tight and keeping the correct pressure of tires. The suspension
components require regular maintenance in accordance with the manufacturer's
recommendations. Transmission components, such as chains and sprockets, must
be replaced every 2 years / 1500 km in off-road use, except in the event of abnormal
wear.
Brake maintenance is also very important for optimal braking performance, please
refer to the brake manufacturer's recommendations. For battery maintenance,
please contact your battery supplier or this manual.
2.

RECOMMENDED TIGHTENING TORQUES

Using a torque wrench, here is the recommended tension for tightening the
various screws of your LMX :
Checkpoint
4 steam/ handlebar screws
2 steam/ fork screws
R/L cranks
Damper pins
Swingarm axle
Bottom bracket screw
Shifter
Saddle trigger
Comodo + -
Front/ rear brakes + calipers
Seat clamp and rail
Rear hub disc nut
Couple
8 Nm
8 Nm
50 Nm
17 Nm
25 Nm
9 Nm
4 Nm
3 Nm
3 Nm
9 Nm
5 Nm
40 Nm
13