Troubleshooting; Warranty - Argos Technologies Flexifuge Manuel D'utilisation

Argos Technologies Flexifuge

Troubleshooting

Error
Unit does not start
Excessive noise
or vibration
If suggested solutions are unsuccessful,
please contact Argos Technologies at 847-622-0456

Warranty

• The full warranty for this device is 12 months from the date of sale.
• During this period of time the device will be repaired or exchanged without charge.
• Warranty is null and void on devices with damaged manufacturer's number; damaged seal;
damage due to improper use; storage, or transport of device; damage due to service by
unauthorized persons.
Contact
Argos Technologies, Inc.
1551 South Scottsdale Court
Suite 200
Elgin, IL 60123
Toll Free: 800-886-8675
International: 847-622-0456
www.argos-tech.com
Copyright © 2009 Argos Technologies, Inc.
Mini Centrifuge — Operator's Manual
™
Cause
Power cable not
connected
Power supply
Lid not closed properly
Power switch
Rotor is not loaded
symmetrically
Rotor is slanted
Loose locking screw
Unit base is not level
7
Solution
Check that power cable
is firmly plugged into both
wall outlet and device
Check that there is power
to the wall outlet
Press firmly to close lid
Check that power switch is
at the ON position
Stop the unit and load
the tubes symmetrically.
Ensure that the tubes on
the opposite sides are
equally filled.
Remove the rotor and
reinsert straight and firmly
downwards
Check to see if locking
screw has been inserted
properly and that it has not
been over-tightened
Check that unit on a flat
surface