Set Up Sequence; Controls And Indicators - Eneo VM-32PD Mode D'emploi

ⓔ CVBS OUTPUT: BNC Connector
ⓕ AUDIO INPUT: Phone Jack, Stereo
ⓖ AUDIO OUTPUT: Phone Jack, Stereo
ⓗ AC Input: Power cable (AC Power Plug IEC 320, C14)

Set up sequence

1. Make sure the power of PC and/or Video source were turned off.
2. Plug the Video signal and VGA cable to monitor.
3. Turn the PC and/or Video source power on.
4. Plug the AC power cord onto AC Socket.
(Use reverse sequence to teardown the monitor)

Controls and indicators

ⓐ
Power button: Press the button to turn ON or turn OFF the monitor
ⓑ
Source button: Press the button to show source menu. Select DHMI, S-Video, VGA
and VIDEO input signal
8