5
Pull up on hood and
move to side. Hood will
still be attached to unit.
Slide off timing belt to
remove flat belt.
23
6
Make sure unit is in upright
position. Slide off flat belt and
replace with new belt. Then
replace timing belt.
To reassemble, reverse steps.
Belt: What to Buy
For replacement belts
please order part number
440006361 for tooth/
timing belt or 440006362
for flat belt. To locate a
dealer nearest you, please
call 1-800-944-9200 or
visit our website at
www.hoover.com.
NOTE: Flat belt is smooth
while timing belt has teeth.