Publicité
Les langues disponibles
Les langues disponibles
Camera won't retain settings
Make sure that you have been saving the changes to any parameter
settings that you made while in Setup mode, by pressing "OK"
after changing the setting. If you don't save your new setting after
changing it, the camera will continue to use the original default
setting for that parameter.
Camera responds slowly, does not always capture image when
triggered
Avoid setting the "Duty" (Overwrite) parameter to "Y" (Yes) when an
SD card with capacity of 16GB or higher is inserted. The overwrite
feature requires some time to scan the card and determine the
oldest file(s) to delete and replace with the newest files (images).
The larger the card, the more time this will take, and the camera may
perform significantly slower with high capacity cards if the overwrite
feature is activated. There should be no issue using overwrite with
smaller capacity cards (<16GB), and the feature is provided to offer a
useful option when limited capacity cards are used, or when it it not
practical to check the camera and replace (or download and format)
the card on a frequent basis.
Do not mix battery types-use ALL lithium or ALL alkaline.
Rechargeable batteries are not recommended.
20
Troubleshooting / FAQ
Do not mix old and new batteries.
Publicité
