Maintenance And Inspection - ALFRA TMC 600 Mode D'emploi

MAINTENANCE AND INSPECTION OF THE MAGNETIC CLAMP
Regular maintenance and inspections are necessary to ensure the safe use of the switchable magnetic clamp.
Furthermore, country-specific standards and regulations must be observed depending on application.
The maintenance intervals are classified according to the recommended schedule.
Before every use...
• visually inspect the magnet for damage
• clean the surface of the work piece and the underside of the magnet
• free the underside of the magnet of rust, chips or unevenness
Weekly...
• visually inspect the magnet for damage
• clean the surface of the work piece and the underside of the magnet
• free the underside of the magnet of rust, chips or unevenness
Monthly...
• check the markings and labelling on the magnet for legibility and damage and replace them
if necessary
Annually...
• have the load-bearing capacity of the magnet checked by the supplier or an authorized workshop,
should the application so require
Unauthorized repairs or modification to the magnetic clamp are not permitted.
!
If you have any questions, contact the manufacturer.
17