Assembling The Microscope - Optika Italy B-150P Serie Mode D'emploi

7.3

Assembling the microscope

1. Remove the dust cap from the microscope frame
and from the bottom of the observation head.
2. Insert the optical head above the stand and
tighten the screw. (Fig. 1)
• Hold the head with one hand during the lo-
cking in order to avoid that the head falls.
3. Insert both eyepieces into the tubes of the optical
head. (Fig. 2)
• For model B-150P-MRPL: only one eye-
piece is used as this model is monocular.
4. Insert the power supply jack in the socket placed
at the rear side of the microscope. (Fig. 3)
Page 8
Fig. 1
Fig. 2
Fig. 3