gdw 1402 Instructions De Montage page 5

Ford Focus break
1999- ....
Ref. 1402
Fitting instructions
1) Disassemble the bumper and permanently remove the synthetic buffer beam.
2) Shove the tow bar with the supporting arms in the liberated openings in the rear of the chassis beams.
Points (A) match the provided drillings in the outside of the chassis beams. Insert the bolts and the
washers, shove the tow bar as much as possible forwards and tighten the bolts firmly on (see tension).
3) Assemble the bumper on the vehicle and fix the bumper at the bottom on points (B) of the tow bar.
4) Assemble the ball (*) together with the socket holder (-p) and the security shackle (-s) and tighten firmly.
Composition
1 tow bar reference 1402
1 ball T45H006
2 bolts M12x65 - DIN931
2 bolts M12x60 - DIN931
4 security nuts M12
2 mounting tubes T45
2 mounting pieces T45
1 security shackle (-s)
1 socket plate (-p)
4 bolts M10x35 - DIN931
4 security washers DIN128A
4 washers 40x35x12x4
2 nylon bolts M6x15
2 nylon ring nuts M6
2 nylon washers ø15,4x6,2x1,6
All bolts and nuts : quality 8.8
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*')
(*')
(*)
(*-*')
(*')
(*-*')
(*')
(*')
(A)
(A)
(A)
(B)
(B)
(B)