Fireplace Xtrordinair 864 See Through GS2 Manuel D'installation page 10

Table des Matières

Publicité

10
Dimensions d'encadrement minimum - Configuration Vent haut ou le côté
Fireplace Enclosure Height
NOTE:
The shaded framing must be
installed after placing the fireplace
in position.
The framing above the fireplace
interferes with the top of the fireplace.
If using the side vent configuration, do
not install the framing to the left side
(shown in light gray).
© Travis Industries
Installation
(for qualified installers only)
Minimum 42"(1067mm)
1/18/2019 – 1404-FR
38-1/2"
978mm
44"
1118mm
* The 26" (661mm) dimension is based upon 1/2" (13mm)
drywall around the perimeter of the fireplace on both sides. If
using thicker drywall (or other facing), you will need to adjust this
dimension.
26" *
661mm
864 GS2 ST

Publicité

Table des Matières
loading

Table des Matières