Publicité
Les langues disponibles
Les langues disponibles
Multifunction Installation Tester/English
Using the x1/2, x1 and x5 manual selection
1-Turn the rotary switch to the RCD position
2-Press F1 and aspect button from the AUTO to
select x1/2, x1 and x5
3-Using the F2 and F3 button, select the RCD's trip
current and type of the RCD. (General/Selective)
4-Connect the test leads as shown in Figure 15
5-If --- from the lower right corner disappears and
voltage of the L- PE on the lower left appears, the
unit is ready to TEST
(If N and PE test leads are reversed, the instrument
will still carry out the test)
6-Using the Selective RCDs with F3 button
S : Selective (time-delayed) RCDs
S (Selective (time-delayed)) RCDs will measure by delaying 30 seconds and then stream the current.
(will display 30 seconds during the time of the delay)
AC RCD streams current in r.m.s. value which has the sine wave form.
DC RCD streams current in r.m.s. value which has the pulse wave form.
7-Using the Selective 0°and 180° with F4 button
8-Press the TEST button when ready
9-Record slowest time
Using the RAMP Function
1-Turn the rotary switch to the RCD position
2-By pushing the F1 button select RAMP from AUTO
3-Using the F2 and F3 button, select the RCD's trip
current and type of the RCD
4-Using the Selective 0°and 180° with F4 button
5-Press test button-the test current "ramps up from
3mA to 33mA in 3mA stages
6-The RCD should operate approximately 21mA for
it to be in Compliance
20
Figure 17x1 Mode-Measuring screen
Figure 18 RCD Ramp-Measuring screen
13/08/2017 Version No. 001
5.2.6-RCD Function Menu Operation
Main Display
RCD AUTO
Menu Display
F1 Button:
Pop-up and shutdown RCD menu, Shutdown mode is activated when the user selects.
F2 Button:
Pop-up and shutdown Trip Current menu, Shutdown mode is activated when the user selects
F3 Button:
Pop-up and shutdown Type of RCD menu, Shutdown mode is activated when the user selects
F4 Button:
Pop-up and shutdown Type of 0°/180° menu, Shutdown mode is activated when the user selects
Up Button:
Up menu to select the current active sub-options.
Down Button:
Down menu to select the current active sub-options.
Enter Button:
Confirm the user select mode.
13/08/2017 Version No. 001
Multifunction Installation Tester/English
Other
21
Publicité
