Navigating Through The Menu; Main Menu List - Mitsubishi Electric PZ-62DR-E Manuel D'instructions

Masquer les pouces Voir aussi pour PZ-62DR-E:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Navigating through the menu

Main menu list

Setting and display items
User options
Fan speed timer
Timer
Weekly timer
Night purge setting
Commissioning Initial
setting
Airflow
Auto bypass
Use to set the operation at pre-set fan speed and
time period.
After pre-set operation, the unit goes back to the
fan speed that was set before the pre-set operation.
* Clock setting is required.
On/Off timer Use to set the operation On/Off times.
• Time can be set in 5-minute increments.
* Clock setting is required.
Auto-Off
Use to set the Auto-Off time.
timer
• Time can be set to a value from 30 to 240 in
10-minute increments.
Use to set the weekly operation On/Off times.
• Up to eight operation patterns can be set for each
day.
* Clock setting is required.
* Not valid when the On/Off timer is enabled.
Use to set the night-purge operation to drow cooler
outside air into the room at night.
Main/sub
Use to change the Main/sub setting when
connecting two remote controllers, one of them
needs to be designated as a sub controller.
* Refer to the Installation manual.
Clock
Use to set the current time.
Contrast
Use to adjust screen contrast.
Display
Use to set the remote-controller-related items as
details
necessary.
• Clock display
• Temperature unit setting
• Sensor Value display
* Refer to the Installation manual.
Administrator
Use to change the Administrator password.
password
* Refer to the Installation manual.
Language
Use to select the desired language.
selection
Use to adjust the fan speed output of Fan speed 1
to Fan speed 4. The function is available for both
Supply and Exhaust fan separately. Each fan speed
can be set 25% to 100% by 5% pitches.
Use to adjust the automatic ventilation mode. Mode
switches between heat recovery mode and bypass
mode in accordance with room temperature and
outdoor temperature. The temperature range of the
bypass ventilation can be set.
Eng-14
Setting details
Reference
page
22
24
26
28
30
18
19
20
32
35

Publicité

Chapitres

Table des Matières
loading

Table des Matières