Icon Explanations - Mitsubishi Electric PZ-62DR-E Manuel D'instructions

Icon explanations

Controller operation
Timer
The administrator password must be entered on the password input screen to
change settings. There is no settings that can skip this process.
P
Enter administrator password
Select:
F1
Indicates settings that can be
changed only while the units
ON
are in operation.
Indicates settings that can be
changed while the units are in
night-purge operation.
Indicates functions that are
not available when system is
centrally controlled.
Timer
Cursor
F2 F3 F4
P
Main
: Press to move the cursor left.
: Press to move the cursor right.
: Press to decrease the value by 1.
: Press to increase the value by 1.
*Changes cannot be made unless the correct password
is entered.
Indicates setting that can be changed
only while the units are not in operation
OFF
Indicates functions that are not
available when the buttons are locked.
Indicates settings that can be made
only from the main remote controller.
Main
Eng-11
The table below
summarizes the square
icons used in this manual.