Initial Installer Setup; Installer Setup - Advanced Menu (After Initial Installation); Advanced Menu Options - Mitsubishi Electric RedLINK MHK2 Guide D'installation

Initial Installer Setup

After the MHK2 Controller has communicated
with the indoor unit correctly, MHK2 Controller will
change from the "Wait" screen to the "Initial Installer
Setup" screen and show START SETUP.
1. The MHK2 will search for support of indoor unit
function codes. If it finds indoor unit support, the
controller will load the Function Code setup. If
the controller does not find indoor unit support,
the controller will load the Installer Set Up (ISU).
See page 10 for a full list of ISU options.
2. Touch or to toggle between Function
Code/ISU options.
3. Touch Edit or touch the text area, and then
touch or to edit default setup options.
4. Touch Done or touch the text area to confirm the
setting or press Cancel.
5. Touch or to continue to setup another ISU
option.
6. To finish setup and save your settings, scroll to
the FINISH SETUP screen at the end of the ISU
list.
Note: To see a list of all setup parameters,
go to "Installer Setup Options (ISU) –
Advanced Menu" on page 10. The MHK2
Controller displays the ISU name and the
ISU number.
Installer Setup – Advanced Menu (After Initial Installation)
To access the advanced menu, press and hold the Menu button for 5 seconds.
Touch or to go through the options in the advanced menu.

Advanced Menu Options

Function Codes: This is used to access the device
Function Code settings.
Device Setup: This is used to access the device
ISU settings.
Screen Lock: The controller touch screen can be
set to partially or fully lock. Partial lock allows tem-
porary overrides. Full lock will not allow any over-
rides. You will always have the option to unlock the
device.
System Test: Test the wireless communications or
heating and cooling equipment.
ISU option and
name (scrolling)
ISU option blinking
Unenroll Device:
Remove a connected
receiver or controller.
Reset: Access all reset
options on the MHK2
Controller. This is the
only place to access factory reset.
Alert History: Alert History saves the
last 25 alerts. Once the list is full, the
oldest alert will be kicked out.
7
sandium.com
View ISU
Edit ISU
ISU #
Saves selected ISU Cancels ISU option
option moves on to selection, go back to
the next ISU screen view ISU
Arrow buttons
used to scroll
through ISUs
Arrow buttons
used to scroll
through ISU
options
72
Heat Heat
Auto
Home
Vane Vane