Cross Tools CPG 3000 V Traduction Du Mode D'emploi D'origine page 26

Figure
Workplace safety
4.2.
1. Keep your work area clean and well-lit.Messy or dark work areas can lead to accidents.
2. Do not operate the motorised device is an explosive environment, in which combustible
liquids, gases or dusts are present. Motorised devices generate sparks, which can ig-
nite the dust or fumes.
3. Keep children or other people away when using the device. If you get distracted, you
can lose control over the device.
Safety of persons
4.3.
1. Be attentive. Pay attention to what you are doing and use common sense when working
with a motorised device.
2. Do not use a motorised device if you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention when using the motorised device can cause serious
injuries.
3. Avoid unintentional start-up. Make sure that, the motorised device is switched off
before you lift it or carry it.
4. Clear away the adjustment tools or wrenches before you switch the motorised de-
vice on.If a tool or a wrench is left in a rotating part of the device, it can cause injuries.
5. Wear suitable clothes.Do not wear loose clothes or jewellery. Keep hair, clothes and
gloves away from moving parts.Loose clothes, jewellery or long hair can get caught in
moving parts.
24
Translation of the original operating instructions
Explanation
The device has an electronic control unit
Continuous power rating of electric generator: 2.5 kW
Rated current of electric generator: 11 A
The device has Schuko sockets rated at 230 Volts,
50 Hz.
Protection class of device: IP23M
Faulty electrical or electronic devices and/or devices to
be disposed of must be handed over at the intended re-
cycling places.
5