Publicité
Mitsubishi Galant break
01/1997 – 10/2003
Ref. 1001
Fitting instructions
1)
Remove the rear bumper.
2)
Bring mounting pieces –d and –e into the chassis through the openings at the back, with (A-A') matching
the pre-drilled screw holes. Place at (A') the mounting pieces –f at the exterior side of the chassis and fix
at (A) the washers underneath together with the bolts.
3)
Place the tow bar between mounting pieces –d and –e by using the fixing points (B). Fasten all bolts
well.
4)
Place back the bumper. Mount (*) and fasten everything well.
Composition
Tow bar reference 1001
1 tow ball 943.L001
1 security shackle
4 bolts DIN933 - M12x40
8 washers DIN128A - M12
4 bolts DIN933 - M12x30
4 nuts DIN 934 - M12
8 bolts DIN933 - M10x30
4 washers 905.003 (40x35x12x4)
8 washers DIN128A - M10
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
1 mounting piece –d
(*)
1 mounting piece –e
(*)
2 mounting pieces –f
(*-B)
(B)
(B)
(A-A')
(C-D)
(C-E)
All bolts and nuts : quality 8.8
(A')
(A)
(A')
Publicité
