Emerson LURAY ECO CF860B000 Mode D'emploi page 17

7. How to Wire Your Ceiling Fan
7.5
Screw the two threaded studs (supplied) into the
tapped holes in the hanger bracket (Figure 29).
7.6
Lift the ceiling cover up to the threaded studs and turn
until studs protrude through the holes in the ceiling
cover (Figure 30).
Secure the ceiling cover in place by sliding lockwashers
over the threaded studs and installing the two knurled
knobs (supplied). (Figure 30).
Tighten the knurled knobs securely until the ceiling
cover fits snugly against the ceiling and the hole in the
ceiling cover is clear of the downrod.
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
THREADED
STUDS (2)
Figure 29
Figure 30
17
(Continued)
CEILING
COVER
THREADED
STUDS (2)
LOCKWASHERS (2)
KNURLED
KNOBS (2)