VINCENT SA-32 Manuel D'utilisation page 25

1
1. TREBLE
Knob for setting the treble proportions (high fre-
quencies) of the sound.
2. TONE
If deactivated, audio signals bypass the tone con-
trol that has been set with the BASS and TREBLE
dials.
3. BASS
Knob for setting the bass proportions (low fre-
quencies) of the sound.
4. POWER
This is the main power switch for turning on and
off the device. The preamplifier is separated from
the mains voltage when switched off and cannot
be set into a standby state.
FRONT VIEW
3
2
5
4 6
5. SR: sensor diode for the remote control
6. VOLUME: Volume dial
This is the knob for the adjustment of the main
volume level of the system.
7. GAIN:
-8dB attenuation of the output signal
With the activation of this function, the output
signal (9) is reduced by 8 dB and thus the volume
of the attached speakers. It should only be activat-
ed if even at low volume settings the volume is
already very high.
8. INPUT: Input Selector
This dial allows you to choose one of the six
inputs (S1,..., S6).
S4
S3
S2 S5
S1 S6
8
7
Vincent
25