Publicité
Les langues disponibles
Les langues disponibles
Packing list: 1 Cable set
1 Socket
1 Socket retaining plate
1.
Disconnect the earth lead from the battery.
2.
Dismantle boot floor screens and vehicle rear lights screens.
In order to connect the cable set with socket drill the 6mm hole in the floor of the vehicle boot (possibly use side
3.
opening in vehicle, near left rear lights). Increase the diameter to 20mm. Secure it with anti-corrosion remedy.
4.
Connect the cable set in the following way:
a) Pull the end of cable set with metal terminal and attached rubber grommet through the hole described in point
3 from boot outside to socket mounting point, mount the rubber grommet in the hole,
b) Draw attached rubber socket retaining plate over the end of cable set (if necessary use anti-friction agent),
c) Disassemble the socket and connect cables according to the following assignment:
7 pin
Function
Indicator left
Fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Fog light
13 oin
Function
Indicator left
Trailer fog light
Rear fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Reversing light
Trailer current supply
Charge line plus
Charge line earth
Not assigned
Earth (trailer)
5.
Push the socket with rubber retaining plate and screw the socket tightly onto the retaining plate using the supplied
nuts and screws:
a) Pay special attention to the right position of rubber retaining plate,
b) Put the cable set gently to avoid any folds and to secure it from possible wiping.
Draw end with bunch of black/white, black/red and grey/black leads to left rear lights and connect with empty
6.
contacts on left lamp casing according to the following description:
black/white
black/red
grey/black
Electrical Set for Trailer Connection
Part no.:
7-pin
Part no.:
13-pin
3 Screws M5X35
3 Nuts M5
3 Spring washer
Installation instruction
Contact description
1
(L)
2
(54-G)
3
(31)
4
(R)
5
(58-R)
6
(54)
7
(58L)
8
(58-b)
Contact description
Cable colour
1
black/white
2
2a
3
brown
4
black/green
5
grey/red
6
black/red
7
grey/black
8
blue/red
9
red/blue 2,5mm
10
yellow 2,5mm
11
12
13
BL (left indicator)
B (brake lights)
58 (left standing lights)
004-698
Audi 80 B4 Lim. manufactured 09.91-10.94
007-948
Audi 80 B4 Lim. manufactured 09.91-10.94
2 Cable ties 300 mm
1 Sheet-metal screw
1 Rubber grommet
Cable colour
black/white
brown
black/green
grey/red
black/red
grey/black
2
2
2
2,5mm
2
2,5mm
10 Cable ties 100 mm
1
2
6
7
3
5
4
8
Contact description in
7-pin socket
8
7
9
1
10
6
2
4
3
11
5
12
13
2a
Contact description in
13-pin socket
Publicité
