Technical Data - SPERONI JGP-JH-6005C Notice De Montage

• Do not pour corrosive liquids (chemical products, cleaning
products) nor abrasive material.
• Do not expose the pump to frost.
• Do not operate the pump without water.
• Never carry the pump by its cable, nor pull on the cable to
unplug it.
• Do not modify the interior of the pump.
• While the pump is running, do not touch the pump, as well as
objects in contact with the water (for example, objects in the
water, railings, etc.).
• Water that has been delivered with this appliance is no drinking
water
• Do not pump greases, oils and salt water.
• Do not pump waste water from sanitary facilities and silty
• Do not pump water that has a higher temperature than 35°C.
2.8 RESIDUAL RISKS
• There are no additional residual risks associated with the use,
maintenance and transport of this product.

3. TECHNICAL DATA

Surface pump model JGP-JH-6005C(JGP6005C)
Power rating 600W
Electric voltage / Electrical frequency 230V / 50Hz
Maximum starting current 5A
Maximum working current 2.5A
Capacitor parameters(capacity / maximum
12 μF/450v
voltage)
Insulation class B
EN
205