Olympus CAMEDIA C-2 Zoom Manuel De Base page 11

basic_e_d.fm Page 11 Tuesday, February 12, 2002 4:29 PM
SETTING THE DATE AND TIME
1
Open the lens barrier.
2
Press .
The shooting mode top menu is displayed.
3
Press on the arrow pad to select MODE MENU.
4
Press to select the SETUP tab, then press
5
Press to select
6
Press
Y-M-D (Year/Month/Day)
M-D-Y (Month/Day/Year)
D-M-Y (Day/Month/Year)
Then press .
The cursor moves to the next setting field.
7
Press
the next field.
Press to move back to the previous setting field.
8
Repeat the above steps until the date and time are completely
set.
9
Press .
For a more accurate setting, press
The clock starts when you press
10
Close the lens barrier.
The camera turns off.
If the camera is left for about 1 hour with the batteries removed, or if the
battery power is exhausted, the date and time settings may be canceled or
become incorrect. Before taking important pictures, check that the date and
time settings are correct.
, then press
to select one of the following date formats:
to set the first field, then press
when the clock hits 00 seconds.
.
.
.
to move to
En 11
En