Hisense H299BME Notice D'utilisation page 14

Assembling
Before assembling, please drain the
w a t e r i n s i d e t h e t a n k , a n d c h e c k
whether the washer is reversed or not.
1. Insert the head into the hole.
2.Fit the tank along the guides on the
door.
3.Press down on the two side of the
tank.
4.When you hear a click sound, that
means the installation is completed.
Warning!
1.Be careful not to press on the head;
2.When fitting the water tank, ensure the
head inserted into the hole first;
3.If you found the washer reversed or
loosed when removing the tank, you
must take off the fixed holder by
contrarotating it first, then put the
washer to the correct position, and
fixed holder
Filling water
1. Open the water supply inlet cover from the
left side.
2. Fill the water.
Caution!
●
suggested), and not above the level.
Otherwise, it may overflow even when the
cap cover
●
beverage(milk,juice,carbonated
etc) is not suggestted to be used than
potable water. Especially beverage including
grain must not be used (may result in
failure).
●
tank directly.
Warning!
Don't touch other parts of the appliance
sealing washer when filling
water leakage.
Hisense Refrigerator
Fill with water up to 1.8L ( which is
is close.
Other
Hot water can not be filled into the water
water, it may cause the
14
beverage