bosal 002-668 Instructions De Montage page 4

Bring the end of cable set marked R to the right tail lamp.
6.
a) Disconnect 7-way connector in vehicle tail lamp and join it with fitted connector from cable set,
b) Join remaining connector from cable set to right tail lamp connector.
Bring another end of cable set to the left tail lamp.
7.
a) Disconnect 7-way connector in vehicle tail lamp and join it with fitted connector from cable set,
b) Join remaining connector from cable set to left tail lamp connector.
Connect brown and white
8.
the eyelet terminal with sheet metal screw, do not secure the hole with anti-corrosion remedy).
9. Trailer power supply:
Refer to 13-pin version only. 3-pin connector housing (red/blue, yellow, and white/brown cables) is provided for ex-
panded socket functions. Put this part of cable set behind the trim. To expand socket functions it is necessary to or-
der the following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Secure the cable set with supplied cable ties, re-install all trims and other parts which were removed during instal-
lation.
Connect the earth lead to the battery and check all vehicle functions with connected trailer or suitable testing de-
vice.
cables (only in 13-pin sets) to earth (for instance drill the 3mm hole and connect and fix
part no. 014-169
part no. 015-069