Recording; Playback - Korg ToneWorks PANDORA PX3 Notice D'emploi

2. Recording

When you press the [
cording, the recording time will be shown as a
numerical value and in the value display.
recording time display
When you wish to stop recording, press the [
button or the [
When recording ends, loop playback will begin
automatically.
Unless you manually stop recording, recording
will continue as long as permitted for the select-
ed recording mode.
The phrase will be recorded and played back in
mono.
• [ ] button/[
and begin playback
28
] button to begin re-
] button.
] button: End recording

3. Playback

The recording phrase will playback as a loop.
During playback or while paused, you can use
the +/- buttons to select programs.
playback speed (%)
]
Rotating the Value dial toward the left will slow
down the playback speed without affecting the
pitch.
The playback speed can be adjusted in 5% steps
over a range of 100%, 95%, 90%...25%.
During playback, you can press the [HOLD] button
to hold the sound at that moment (Hold function).
• [ ] button: Pause/playback
• [ ] button: Re-record
• [ ] button: Rewind
• [HOLD] button: Switch the Hold function on/
off
• Value dial: Set the playback speed