Canon PowerShot S110 Guide De Mise En Route page 68

Connecting to a Computer
• Up to 16 access points will be displayed. If no access points are detected,
choose [Manual Settings] in step 4 to manually set an access point.
Follow on-screen instructions and enter an SSID, security settings, and an
encryption key.
• [***] is displayed for the encryption key in step 5 when the same access
point is used to connect to another device. To use the same encryption key,
choose [Next] (either press the <q><r> buttons or turn the <7> dial) and
press the <m> button.
• To add multiple computers, repeat the above procedures starting from step 1.
• You can also configure this setting through touch-screen operations (see
Camera User Guide).
68
7
Choose a computer to connect
to.
z z Choose the computer to connect to,
following steps 7 – 8 on = 6 5. The
computer is now added to the list.