Canon PowerShot S110 Guide De Mise En Route page 63

• Once a computer is added, the computer name will be displayed on the
screen in step 3. To connect to a computer again, simply choose the
computer name from the list.
•
You can also configure this setting through touch-screen operations (see
Camera User Guide).
• When a connection destination is set using the Touch Actions setting (see
Camera User Guide), you can automatically access the function to connect
to the last connected destination from the next time by just dragging on the
screen without needing to perform the connection operation.
3
Choose [Add a Device].
z z Press the <o><p> buttons or turn the
<7> dial to choose [Add a Device], and
then press the <m> button.
X X A list of detected access points will be
displayed in the [Access Point Connect]
screen.
Proceed to either "Connecting to a WPS
X X
Supported Access Point" (= 6 4) or
"Connecting to Access Points in the List"
(= 6 7).
X X To manually choose and connect to an
access point, see the
explanation column (= 6 8) in
"Connecting to Access Points in the List".
Connecting to a Computer
supplemental
63