Canon PowerShot SX160 IS Guide De Mise En Route page 17

Display Language
The display language can be changed as needed.
• The current time is displayed if you wait too long in step 2 after pressing
the <m> button before you press the <n> button. In this case,
press the <m> button to dismiss the time display and repeat step 2.
• You can also change the display language by pressing the <n> button
and choosing [Language
1
Enter Playback mode.
z z Press the <1> button.
2
Access the setting screen.
z z Press and hold the <m> button, and
then immediately press the <n>
button.
3
Set the display language.
z z Press the <o><p><q><r> buttons or
turn the <5> dial to choose a language,
and then press the <m> button.
X X Once the display language has been set,
the setting screen is no longer displayed.
] on the [3] tab.
Initial Preparations
17