Canon PowerShot SX160 IS Guide De Mise En Route page 16

Initial Preparations
• Unless you set the date, time, and home time zone, the [Date/
Time] screen will be displayed each time you turn the camera on.
Specify the correct information.
• To set daylight saving time (1 hour ahead), choose [
choose [
Changing the Date and Time
Adjust the date and time as follows.
• Once the date/time battery is depleted, the [Date/Time] screen will be displayed when
you turn the camera on. Follow the steps on = 1 5 to set the date and time.
• If the [Date/Time] screen is displayed each time you turn the camera on,
even after you have set the date and time correctly, replace the date/time
battery with a new one (see Camera User Guide).
16
] by pressing the <o><p> buttons or turning the <5> dial.
1
Access the camera menu.
z z Press the <n> button.
2
Choose [Date/Time].
z z Move the zoom lever to choose the [3]
tab.
z z Press the <o><p> buttons or turn the
<5> dial to choose [Date/Time], and
then press the <m> button.
3
Change the date and time.
z z Follow step 2 on = 1 5 to adjust the settings.
z z Press the <n> button to close the menu.
] in step 2 and then