iRobot Roomba S Serie Guide Du Propriétaire page 11

Cleaning the Full Bin Sensors
1
Remove and empty the bin.
EN
2
Wipe the inner sensors with a
clean, dry cloth.
Full Bin
Sensors
3 Remove the filter and wash the bin,
or gently clean the bin to ensure
the sensor ports are clean.
6
For more information, visit global.irobot.com
Washing the Bin
Important:
Do not wash the filter.
Remove the filter before washing the bin.
Release the bin, remove the filter,
1
and open the bin door.
2
Rinse the bin using warm water.
Note:
Bin is not dishwasher safe.
Make sure bin is completely dry. Then
3
reinsert filter and place bin back in
the robot.
Cleaning the Corner Brush
Use a small screwdriver to loosen the
1
screw holding the Corner Brush in place.
2
Pull to remove the Corner Brush.
Remove any hair or debris,
then reinstall the brush.