Lubrication - Proxxon DH 40 Mode D'emploi

It should be particularly ensured that the height
adjustment spindles are clean, as accumulation of dust
here can lead to stiffness.
External cleaning of the housing can then be carried out
with a soft and if necessary damp cloth. Mild soap or
other suitable cleaning agents can be used. Solvents or
cleaning agents containing alcohol (e.g. benzine,
cleaning alcohols etc.) must be avoided, as these can
attack the plastic housing shells.

Lubrication

Normally, no further lubrication is necessary for operation.
Avoid oiling or greasing the height adjustment spindles;
remember that lubricants can mix with planing dust and
will then have to be removed. If necessary, use a dry
lubricant only.
Disposal:
Please do not dispose of the device in domestic waste!
The device contains valuable substances that can be
recycled. If you have any questions about this, please
contact your local waste management enterprise or other
corresponding municipal facilities.
Declaration of EC conformity
Name and address of producer:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
We declare with sole responsibility that this product
conforms with the following EC regulations:
EU low voltage directive
EU EMC-directive
Applicable standards
EU machine directive
Reg.-No.:
Date:
Signature:
Function:
Name:
73/23/EWG
93/68/EWG
DIN EN 61029-1/12.2003
89/336/EWG
DIN EN 55014-1 / 09.2003
DIN EN 55014-2 / 08.2002
DIN EN 61000-3-2 / 09.2005
DIN EN 61000-3-3 / 06 2006
98/37 EWG
DIN EN 61029-1/12.2003
CE/71/220/03/0269
28.08.06
Development/Construction
Jörg Wagner
- 15 -