Revo SUPERSYSTEM Guide Du Propriétaire page 3

SAFETY INSTRUCTIONS
Operating malfunctions can take the form of heating of the device or the development of smoke from the device or the device's power
adapter.
Operational safety
Loud or unusual noises can also be a sign of a malfunction.
In this case, pull the power adapter out of the socket immediately.
Only touch the power adapter by the housing.
Never pull the power adapter by the cable if you are using the device with a power adapter.
If you are going to be absent for a long period of time or during a thunderstorm, pull the device out of the socket.
Make sure that contact with moisture, water or splash water is avoided and that no objects filled with liquids -
such as vases - are placed on or near the appliance or power adapter.
If foreign bodies or liquids get into the device or the power adapter, pull the power adapter out of the socket immediately. Have the device
checked by qualified personnel before you use it again.
Otherwise, there is a risk of electric shock.
Make sure that the device or the power adapter is not exposed to dripping or splashing water and that there are no open sources of fire (e.g.
burning candles) near the device or the power adapter.
Connect device
> Please ensure that the power source (socket) is easily accessible.
> Do not kink or squeeze any cable connections.
> Before using the device, check that the voltage information on the device
corresponds to the local mains voltage. The information on the power adapter must correspond to the > local
power supply.
> Only connect the device to the power adapter within the scope of supply.
> Place the device on a firm, level surface.
> The device consumes power in standby mode. To completely disconnect the device from the mains, the
power adapter must be disconnected.
3