Télécharger Imprimer la page

Adler europe AD 7909 Mode D'emploi page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
electrician for this.
14. Clean the air filter regularly. The frequency of cleaning depends on the cleanliness of the
air.
15. After turning off the machine, wait at least 5 minutes before turning it back on.
16. Do not use the device in sunny places. When the device overheats, the overheat
protection will switch on the device.
17. To ensure effective cooling, a distance of at least 50 cm should be kept between the side
walls of the device and the wall or furniture or curtains.
18. Due to the limited performance of the device, if the difference between the target
temperature and the ambient temperature is too great, the target temperature may not be
reached.
19. To reduce the risk of fire, electric shock or injury when using the air conditioner, observe
the following basic precautions:
a) Connect to a grounded outlet with 3 pins.
b) Do not remove the grounding prong.
c) Do not use the adapter.
d) Do not use an extension cord.
e) Disconnect the air conditioner before servicing.
f) Use two or more people to move and install the air conditioner.
20. Do not use agents accelerating the defrosting or cleaning process other than those
recommended by the manufacturer.
21. The device should be stored in a room without constantly operating sources of ignition,
for example: open fire, gas appliances or electric heaters.
Device Description - Picture A
1. Control panel
3. Remote controller (picture E)
5. Evaporator inlet with EVA filter
7. Upper cooler drain hole
9. Window exhaust adapter
Control Panel Description - Picture D.
A. Power button
C. Timer / Temperature down button
E. Sleep model buttons (D & F pressed together on cooling mode)
G. Timer button
I. Signal receptor for remote controller
K. Dry mode control lamp
M. Full water control lamp
O. The switch on / off control lamp
Q. Temperature control lamp
2. Cold air outlet
4. Transport handle
6. Air exhaust pipe
8. Down cooler drain hole
10. Connector of air exhaust pipe
B. Mode button
D. Timer / Temperature up button
F. Fan speed button
H. LED screen
J. Cool mode control lamp
L. Fan mode control lamp
N. Sleep mode control lamp
P. Time control lamp
5

Publicité

loading