Publicité
Les langues disponibles
Les langues disponibles
"URBAN" CARRY-COT FIXING:
Insert carry-cot into fixing block (Fig. 5) until the complete hooking (Fig. 5A). For the correct
hooking, the fixing block of carry-cot must be centered respect to the fixing block of the
support (Fig. 6).
WARNING: If inserted backwards (Fig. 7) carry-cot IS NOT locked and is a source of
serious danger.
Check the correct fastening raising cradle shaking slightly.
To remove cradle, press the red safety button located on the side of support and then pull
the sliders as described into modular system instructions.
CLOSING:
Remove carry-cot. Release the safety locks of the support by pulling the tabs outside and
lifting them out. Close the product and store in a safe place away from children.
WARNINGS:
READ CAREFULLY THE INSTRUCTIONS BEFORE ASSEMBLY OF SUPPORT
FOR CARRY-COT. KEEP THIS MANUAL FOR FUTURE REFERENCES. THE
NON-OBSERVANCE OF THESE WARNINGS AND USE INSTRUCTIONS COULD
CAUSE SERIOUS CONSEQUENCES TO YOUR BABY'S SAFETY.
We know how you parents care about health and safety of your baby, for this reason
we recommend you to follow these simple warning and using advices.
- WARNING: NEVER LEAVE YOUR CHILD UNATTENDED, WITHOUT THE
SUPERVISION OF AN ADULT. THE SAFETY OF YOUR CHILD IS UNDER YOUR
RESPONSIBILITY.
- Throw away and keep out of baby's reach the packing plastic poly bags, to avoid
suffocation.
- Before every use check all locking systems work correctly and all components are
not defected or damaged; in this case do not use product.
- Check that the product doesn't have any loosened or improperly assembled
screws, or any other elements which can injure your baby. Do not use with any
broken, defected or loosen parts.
- Make assembly and installation operations WITHOUT any babies around.
Assembly of this product should be made by an adult.
11
Publicité
