Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY AND USE INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
For a correct use of Support for Carry-cot we recommend you to take few minutes to read
this manual.
QUALITY GUARANTIES
- This product is guaranteed for a period as stated by the laws in force. If the item is
repaired or modified by not authorized people, the warranty expire.
- The negligence of the product and the lack of maintenance involve the loss of warranty.
- All defects and/or deteriorations caused by wrong use, by the non respect of security
standards, assembling and use here mentioned or by modifications made on the product,
cannot be claimed.
- The natural consumption and damage caused by incorrect or wrong use are not disputed.
- Scratches, wear, dullness or the turning yellow of the parts due to rubbing, to the use of
detergents, sweat or weather phenomena are not a manufacturing defect.
BEFORE USING THIS ARTICLE, READ CAREFULLY THE INSTRUCTIONS AND THE
SEQUENCE OF ASSEMBLY TO AVOID UNNECESSARY HAZARDS TO YOUR CHILD!
THROW AWAY AND REMOVE ALL POLY BAGS OF PACKING, THEY MIGHT BE RISKS
OF SUFFOCATION FOR YOUR BABY!
NEVER LEAVE YOUR CHILD UNATTENDED!
Our "Support for Carry-cot" complies ONLY the fixing of cradle of Plebani trio Mod. "D1
Trio" and "Urban". This item is not compatible with carry-cot of other brands or
manufacturers.
OPENING:
Open Support (Fig. 1) pushing well red locks (Fig. 2) until total opening (Fig. 3).
WARNING: Make sure the product is fully open and on a flat surface. DO NOT place the
Support on uneven, unstable or raised surfaces as tables, worktops, beds etc.
"D1 TRIO" CARRY-COT FIXING:
Insert carry-cot into fixing block (Fig. 4) until the complete hooking (Fig. 4A). Check the
correct fastening raising cradle shaking slightly. To remove carry-cot, with one hand
hold the carrying handle and with the other push up the lever on one side of cradle under
the canopy, as described into "D1" modular system instructions.
10
:
IMPORTANT!
:
Publicité
